BFLGZ - ADHESIVE EC-1137

  • MSDS: BFLGZ
  • Manufacturer: 3M COMPANY
  • Product Name: ADHESIVE EC-1137
  • National Stock Number: 8030-00-680-2039
Product Identification

Product ID:ADHESIVE EC-1137
MSDS Date:01/01/1985
FSC:8030
NIIN:00-680-2039
MSDS Number: BFLGZ

Responsible Party
3M COMPANY

Emergency Phone: 612-733-1110

Cage: 76381

Contractor
MINNESOTA MINING AND MFG CO, DBA 3M
SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

Ingredients

SILICATE, ALKALI METAL (WHEN COMBINED WITH METAL, FILLER =


METALLIC FILLER, SILVER

OSHA PEL 0.01 MG/M3 (AG)

ACGIH TLV: 0.1 MG/M3 (AG)


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 35 - 50%

Hazards

Effects of Overexposure:SKIN & EYE IRRITATION UPON DIRECT & PROLONGED
CONTACT.

First Aid

First Aid:EYES: FLUSH IMMEDIATELY WITH WATER FOR 15 MINUTES. CALL
PHYSICIAN. SKIN: WASH WITH SOAP & WATER.

Fire Fighting

Flash Point:NONE
Extinguishing Media:NON-FLAMMABLE
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:COLLECT SPILLED MATERIAL. WEAR SAFETY GLASSES
& RUBBER OR PVA GLOVES. PLACE IN CONTAINER.

Handling

Handling and Storage Precautions:PROTECT FROM FREEZING. AVOID CONTACT
WITH EYES & SKIN.
Other Precautions:WASH THOROUGHLY BEFORE EATING OR SMOKING.
INCOMPATIBILITY: H*2 IN CLOSED CONTAINER MAY DEVELOP PRESSURE.

Exposure Controls

Respiratory Protection:MANUFACTURER STATES NONE REQUIRED
Ventilation:MECHANICAL VENTILATION RECOMMENDED
Protective Gloves:RUBBER, PVA
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
PH: 9-12. CONTAINER SIZE- 1 QT.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:212F, 100C
Vapor Pres:25
Vapor Density:<1
Spec Gravity:2.0
Solubility in Water:MISCIBLE
Appearance and Odor:BROWN PASTE
Percent Volatiles by Volume:35

Stability

Stability Indicator/Materials to Avoid:YES
AL, GALVANIZED STEEL PRODUCES HYDROGEN. SEE OTHER PRECAUTION
Hazardous Decomposition Products:CO, CO*2, SMOKE PARTICLES IN EXCESSIVE
HEAT OR FLAMES.

Disposal

Waste Disposal Methods:MANUFACTURER RECOMMENDS SANITARY LANDFILL.
DISPOSAL METHODS MUST BE IAW FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.